View FHP3230_416366.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
December 2005
FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
Features at 5V
2.5mA supply current per amplifier 0.008% / 0.01 differential gain/phase 16MHz 0.1dB bandwidth at Vo = 2Vpp Output voltage range at RL = 150 : -4.8V to 4.8V Input includes negative rail 110V/s slew rate 100mA output current 17nV/Hz input voltage noise >100dB PSRR, CMRR, and Open Loop Gain FHP3130 - improved replacement for KM4100 FHP3230 - improved replacement for KM4200 FHP3130 lead(Pb)-free package options (SOT23-5, SOIC-8) FHP3230 lead(Pb)-free package options (MSOP-8, SOIC-8) FHP3430 lead(Pb)-free package options (TSSOP-14, SOIC-14) RoHS compliant Fully specified at +3V, +5V, and 5V supplies
Description
The FHP3130 (single), FHP3230 (dual), and FHP3430 (quad) are low cost, high performance, voltage feedback amplifiers that consume only 2.5mA of supply current per channel while providing 100mA of output current. These amplifiers are designed to operate from 2.7V to 12V (6V) supplies. The common mode voltage range extends below the negative rail and the output provides rail-to-rail performance. The FHP3130, FHP3230, and FHP3430 are designed on a complimentary bipolar process and provide 170MHz of bandwidth and 110V/s of slew rate at a supply voltage of 5V. The combination of low power, rail-to-rail performance, low voltage operation, and tiny package options make these amplifiers well suited for use in many general purpose high speed applications. These amplifiers also provide excellent video specifications. They offer extremely low differential gain and phase (0.008%/ 0.01) and 0.1dB gain flatness to 16MHz for superb standard definition video performance. Their output drive capability effortlessly supports 4 video loads.
0.01 0.008 0.01 0.008
Vs = 5V RL = 150 Gain
Differential Phase (deg)
Applications
A/D driver Active filters CCD imaging systems CD/DVD ROM Coaxial cable drivers Portable/battery-powered applications Twisted pair driver Video driver
Differential Gain (%)
0.006 0.004 0.002 0 -0.002 -0.004 -0.006 -0.008 -0.01 -0.7 -0.5 -0.3 -0.1 0.1 0.3 0.5 0.7
Phase
0.006 0.004 0.002 0 -0.002 -0.004 -0.006 -0.008 -0.01
Input Voltage (V)
Typical Application - YC Video Line Driver
YIN 75 CIN YOUT 75
1/2 FHP3230
1/2 FHP3230
COUT
1k 1k
75 1k
1k
75
FHP3130, FHP3230, FHP3430 Rev. 1A
1
www.fairchildsemi.com
FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
Pin Configurations
FHP3230 SOIC/MSOP OUT1 -IN1 +IN1 -Vs
1 2 7 3 4 6 5 8 7
Pin Assignments
FHP3230 Pin#
+Vs OUT2 -IN2 +IN2
1 2 3 4 5 6 7
Pin
OUT1 -IN1 +IN1 -Vs +IN2 -IN2 OUT2 +Vs
Type
Output Input Input Input Input Input Output Input
Description
Output, channel 1 Negative Input, channel 1 Positive Input, channel 1 Negative supply Positive Input, channel 2 Negative Input, channel 2 Output, channel 2 Positive supply
FHP3130 SOT23 OUT -Vs +IN
1 2 3 5
8
+Vs
FHP3130 Pin# SOT/SOIC Pin
OUT -Vs +IN -IN +Vs NC
+
4
Type
Input Input Input Input Input Output
Description
Negative supply Positive Input Negative Input Positive supply No Connect
-IN
1/6 2/4
FHP3130 SOIC NC -IN1 +IN1 -Vs
1 2 3 4 8 7 6 5
3/3 4/4
NC +Vs OUT NC
5/7 na / 1, 5, 8
FHP3430 Pin#
1 2
Pin
OUT1 -IN1 +IN1 +Vs +IN2 -IN2 OUT2 OUT3 -IN3 +IN3 -Vs +IN4 -IN4 OUT4
Type
Output Input Input Input Input Input Output Output Input Input Input Input Input Output
Description
Output, channel 1 Negative Input, channel 1 Positive Input, channel 1 Positive supply Positive Input, channel 2 Negative Input, channel 2 Output, channel 2 Output, channel 3 Negative Input, channel 3 Positive Input, channel 3 Negative supply Positive Input, channel 4 Negative Input, channel 4 Output, channel 4
FHP3430 SOIC/TSSOP OUT1 -IN1 +IN1 +Vs +IN2 -IN2 OUT2
1 2 3 4 5 14 13 12 11 10
3 4
OUT4 -IN +IN4 -Vs +IN3 -IN OUT3
5 6 7 8 9 10 11 12 13
4
6 7
9 8
14
www.fairchildsemi.com
2
FHP3130, FHP3230, FHP3430 Rev. 1A
FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
Absolute Maximum Ratings
Parameter
Supply Voltage Input Voltage Range
Min
0 -Vs -0.5V
Max
12.6 +Vs + 0.5V
Unit
V V
Reliability Information
Parameter
Junction Temperature Storage Temperature Range Lead Temperature (Soldering, 10s) 8-Lead SOIC1 8-Lead MSOP1 5-Lead SOT231 SOIC1 14-Lead TSSOP1 14-Lead 155 246 296 130 128 -65
Min
Typ
Max
150 150 300
Unit
C C C C/W C/W C/W C/W C/W
Note: 1. Package thermal resistance ( JA), JDEC standard, multi-layer test boards, still air.
ESD Protection
Product
Package Human Body Model (HBM) Charged Device Model (CDM)
FHP3130
SOT23 TBD TBD SOIC TBD TBD
FHP3230
SOIC 3.5kV 2kV MSOP 3.5kV 1.5kV
FHP3430
SOIC TBD TBD TSSOP TBD TBD
Recommended Operating Conditions
Parameter
Operating Temperature Range Supply Voltage Range
Min
-40 2.7
Typ
Max
+85 12
Unit
C V
FHP3130, FHP3230, FHP3430 Rev. 1A
3
www.fairchildsemi.com
FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
Electrical Characteristics at +3V
Tc = 25C, Vs = 3V, RL = 2k to Vs/2, G = 2, Rf = Rg =1k; unless otherwise noted. Symbol
UGBW BWss BWLs BW0.1dBss GBWP
Parameter
Frequency Domain Response -3dB Bandwidth -3dB Bandwidth Full Power Bandwidth 0.1dB Bandwidth Gain Bandwitdth Product Time Domain Response
Conditions
G = +1, VOUT = 0.2Vpp G = +2, VOUT = 0.2Vpp G = +2, VOUT = 1Vpp G = +2, RL = 150, Rf = Rg = 1.5k, VOUT = 0.2Vpp G = +6, VOUT = 0.2Vpp VOUT = 0.2V step VOUT = 2V step VOUT = 0.2V step VOUT = 2V step, G = -1 VOUT = 1Vpp, 5MHz VOUT = 1Vpp, 5MHz VOUT = 2Vpp, 5MHz, RL = 100, G = -1 > 100kHz FHP3230 at 1MHz
Min
Typ
160 50 45 25 60
Max
Units
MHz MHz MHz MHz MHz
tR , t F tS OS SR
Rise and Fall Time Settling Time to 0.1% Overshoot Slew Rate Distortion / Noise Response
12 45 <1 90
ns ns % V/s dBc dBc dB nV/Hz dB
HD2 HD3 THD en XTALK VIO dVIO Ib dIb IIO PSRR AOL IS RIN CIN CMIR CMRR
2nd Harmonic Distortion 3rd Harmonic Distortion Total Harmonic Distortion Input Voltage Noise Crosstalk DC Performance Input Offset Voltage Average Drift Input Bias Current Average Drift Input Offset Current Power Supply Rejection Ratio Open Loop Gain Supply Current per Amplifier Input Characteristics Input Resistance Input Capacitance Input Common Mode V Range Common Mode Rejection Ratio Output Characteristics
50 50 50 17 62
1 -5 -1.8 -3.5 0.01 DC DC, RL = 150 100 100 2.5
mV V/C A nA/C A dB dB mA
500 1.25 -0.3 to 2 DC, VCM = 0V to Vs - 1.5 RL = 2k to Vs/2, G = -1 95
k pF V dB
VO IOUT ISC
Output Voltage Swing RL = 150 to Vs/2, G = -1 Linear Output Current Short Circuit Output Current VO = Vs/2
0.05 to 2.95 0.1 to 2.9 100 120
V V mA mA
www.fairchildsemi.com
4
FHP3130, FHP3230, FHP3430 Rev. 1A
FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
Electrical Characteristics at +5V
Tc = 25C, Vs = 5V, RL = 2k to Vs/2, G = 2, Rf = Rg =1k; unless otherwise noted. Symbol
UGBW BWss BWLs BW0.1dBss GBWP
Parameter
Frequency Domain Response -3dB Bandwidth -3dB Bandwidth Full Power Bandwidth 0.1dB Bandwidth Gain Bandwitdth Product Time Domain Response
Conditions
G = +1, VOUT = 0.2Vpp G = +2, VOUT = 0.2Vpp G = +2, VOUT = 2Vpp G = +2, RL = 150, Rf = Rg = 1.5k, VOUT = 0.2Vpp G = +6, VOUT = 0.2Vpp VOUT = 0.2V step VOUT = 2V step VOUT = 0.2V step VOUT = 2V step, G = -1 VOUT = 2Vpp, 5MHz VOUT = 2Vpp, 5MHz VOUT = 2Vpp, 5MHz > 100kHz FHP3230 at 1MHz NTSC (3.58MHz), RL = 150, AC coupled into 220F, Vs = 2.5V NTSC (3.58MHz), RL = 150, AC coupled into 220F, Vs = 2.5V
Min
Typ
165 50 30 18 60
Max
Units
MHz MHz MHz MHz MHz
tR , t F tS OS SR
Rise and Fall Time Settling Time to 0.1% Overshoot Slew Rate Distortion / Noise Response
12 55 <1 105
ns ns % V/s
HD2 HD3 THD en XTALK DG DP
2nd Harmonic Distortion 3rd Harmonic Distortion Total Harmonic Distortion Input Voltage Noise Crosstalk Differential Gain Differential Phase DC Performance
56 75 56 17 62 0.02 0.04
dBc dBc dB nV/Hz dB %
VIO dVIO Ib dIb IIO PSRR AOL IS RIN CIN CMIR CMRR
Input Offset Voltage Average Drift Input Bias Current Average Drift Input Offset Current Power Supply Rejection Ratio Open Loop Gain Supply Current per Amplifier Input Characteristics Input Resistance Input Capacitance Input Common Mode V Range Common Mode Rejection Ratio Output Characteristics RL = 2k to Vs/2 DC, VCM = 0V to Vs - 1.5 DC DC, RL = 150
1 -5 -1.8 -3.5 0.01 100 100 2.5
mV V/C A nA/C A dB dB mA
500 1.2 -0.3 to 4 95
k pF V dB
VO IOUT ISC
Output Voltage Swing RL = 150 to Vs/2 Linear Output Current Short Circuit Output Current VO = Vs/2
0.05 to 4.95 0.1 to 4.9 100 120
V V mA mA
FHP3130, FHP3230, FHP3430 Rev. 1A
5
www.fairchildsemi.com
FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
Electrical Characteristics at 5V
Tc = 25C, Vs = 5V, RL = 2k to GND, G = 2, Rf = Rg =1k; unless otherwise noted. Symbol
UGBW BWss BWLs BW0.1dBss GBWP
Parameter
Frequency Domain Response -3dB Bandwidth -3dB Bandwidth Full Power Bandwidth 0.1dB Bandwidth Gain Bandwitdth Product Time Domain Response
Conditions
G = +1, VOUT = 0.2Vpp G = +2, VOUT = 0.2Vpp G = +2, VOUT = 2Vpp G = +2, RL = 150, Rf = Rg = 1.5k, VOUT = 0.2Vpp G = +6, VOUT = 0.2Vpp VOUT = 0.2V step VOUT = 2V step VOUT = 0.2V step VOUT = 2V step, G = -1 VOUT = 2Vpp, 5MHz VOUT = 2Vpp, 5MHz VOUT = 2Vpp, 5MHz > 100kHz FHP3230 at 1MHz NTSC (3.58MHz), RL = 150, AC coupled into 220F NTSC (3.58MHz), RL = 150, AC coupled into 220F
Min
Typ
170 50 30 16 60
Max
Units
MHz MHz MHz MHz MHz
tR , t F tS OS SR
Rise and Fall Time Settling Time to 0.1% Overshoot Slew Rate Distortion / Noise Response
12 52 <1 110
ns ns % V/s
HD2 HD3 THD en XTALK DG DP
2nd Harmonic Distortion 3rd Harmonic Distortion Total Harmonic Distortion Input Voltage Noise Crosstalk Differential Gain Differential Phase DC Performance
55 75 55 17 62 0.008 0.01
dBc dBc dB nV/Hz dB %
VIO dVIO Ib dIb IIO PSRR AOL IS RIN CIN CMIR CMRR
Input Offset Voltage1 Average Drift Input Bias Current1 Average Drift Input Offset Current1 Power Supply Rejection Ratio2 Open Loop Gain2 Supply Current per Amplifier1 Input Characteristics Input Resistance Input Capacitance Input Common Mode V Range Common Mode Rejection Output Characteristics RL = 2k Ratio2 DC, VCM = -5V to 3.5V DC DC, RL = 150
-6
1 -5
6
mV V/C A nA/C
-3.5
-1.8 -3.5
-0.8 80 80
0.002 100 100 2.5
0.8
A dB dB
3.5
mA
500 1.1 -5 to 4 75 100
k pF V dB
VO IOUT ISC
Notes:
Output Voltage Swing RL = 1501 Linear Output Current Short Circuit Output Current VO = 0V -4.65
-4.95 to 4.95
V 4.65 V mA mA
-4.8 to 4.8
100 120
1. 100% tested at 25C 2. Min/max guaranteed by design/characterization.
www.fairchildsemi.com
6
FHP3130, FHP3230, FHP3430 Rev. 1A
FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
Typical Performance Characteristics
Tc = 25C, Vs = 5V, RL = 2k to Vs/2 for Vs = 5V and 3V, RL = 2k to ground for Vs = 5V, G = 2, Rf = Rg = 1k; unless otherwise noted. Figure 1. Non-Inverting Freq. Response (5V)
1 0 -1
G = 10 G=1 Rf = 0
Figure 2. Inverting Freq. Response (5V)
1 0 -1
G = -10 G = -1
Normalized Gain (dB)
-2
G=5
Normalized Gain (dB)
-2
G = -5
-3
G=2
-3
G = -2
-4 -5 -6 -7 0.1 1 10 100 1000
Vs = 5V Vo = 0.2Vpp
-4 -5 -6 -7 0.1 1 10 100 1000
Vs = 5V Vo = 0.2Vpp
Frequency (MHz)
Frequency (MHz)
Figure 3. Non-Inverting Freq. Response (+5V)
1 -20 0 -30 -1 -2-40 -3-50
G=2 G = 10 G=5
Figure 4. Inverting Freq. Response (+5V)
1 -30 0 -1-40
G = -10 Using 0.1F and 0.01F Bypass Capacitors as suggested
Normalized Gain (dB) PSRR (dB)
G=1 Rf = 0
Normalized Gain (dB) PSRR (dB)
G = -1
-2 -50 -3 -60 -4 -5-70
G = -5 G = -2
-4-60 -5 -70
Vs = +5V -6 -80 Vo = 0.2Vpp
Vs = +5V -6 -80 Vo = 0.2Vpp
-7 -90 0.1 0.1
1
10
100 10
1 Frequency (MHz) Frequency (MHz)
1000 30
-7 -90 0.1 0.1
1
10
100 10
1 Frequency (MHz) Frequency (MHz)
1000 30
Figure 5. Non-Inverting Freq. Response (+3V)
1 0 -1
G = 10 G=1 Rf = 0
Figure 6. Inverting Freq. Response (+3V)
1 0 -1
G = -10 G = -1
Normalized Gain (dB)
-2
G=5
Normalized Gain (dB)
-2
G = -5
-3
G=2
-3
G = -2
-4 -5 -6 -7 0.1 1 10 100 1000
Vs = +3V Vo = 0.2Vpp
-4 -5 -6 -7 0.1 1 10 100 1000
Vs = +3V Vo = 0.2Vpp
Frequency (MHz)
Frequency (MHz)
FHP3130, FHP3230, FHP3430 Rev. 1A
7
www.fairchildsemi.com
FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
Typical Performance Characteristics
Tc = 25C, Vs = 5V, RL = 2k to Vs/2 for Vs = 5V and 3V, RL = 2k to ground for Vs = 5V, G = 2, Rf = Rg = 1k; unless otherwise noted. Figure 7. Frequency Response vs. CL (+3V)
1 0 -1 -2 -3 -4
+
Figure 8. Frequency Response vs. RL (+3V)
1 0
RL = 50
Vs = +3V Vo = 0.2Vpp CL = 2000pF RS = 5 CL = 1000pF RS = 6.5 CL = 500pF RS = 10
Rs 1k CL RL
Normalized Gain (dB)
Normalized Gain (dB)
-1
RL = 5K
-2 -3
RL = 150
-4
RL = 1K
-5 -6 -7 0.1
1k
-
CL = 100pF RS = 20 CL = 50pF RS = 15
-5 -6 -7
Vs = +3V Vo = 0.2Vpp
1
10
100
1000
0.1
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
Figure 9. Large Signal Freq. Response (+5V)
1 0.2 0 -1
VO = 1Vpp
Figure 10. Gain vs. Flattness
Normalized Gain (dB)
Normalized Gain (dB)
0 -0.2 -0.4 -0.6 -0.8 -1
G=2 Rf = Rg = 1.5k Vs = +5V RL = 150 Vs = 3V Vs = 5V Vs = 10V
-2 -3 -4 -5 -6 -7 0.1
VO = 2Vpp VO = 4Vpp
G=2 Vs = +5V
1
10
100
1000
0.1
1
10
100
Frequency (MHz)
Frequency (MHz)
Figure 11. HD2 vs. RL (+3V)
-40 -45 -50
RL = 2K
Figure 12. HD3 vs. RL (+3V)
-40 -45 -50
Distortion (dBc)
-55 -60 -65 -70 -75 -80 -85 -90 0.1 1 10
VO = 1Vpp RL = 1K RL = 5K RL = 150
Distortion (dBc)
-55 -60 -65 -70 -75 -80 -85 -90 0.1 1 10
RL = 1K RL = 2K RL = 150 VO = 1Vpp RL = 5K
Frequency (MHz)
Frequency (MHz)
www.fairchildsemi.com
8
FHP3130, FHP3230, FHP3430 Rev. 1A
FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
Typical Performance Characteristics
Tc = 25C, Vs = 5V, RL = 2k to Vs/2 for Vs = 5V and 3V, RL = 2k to ground for Vs = 5V, G = 2, Rf = Rg = 1k; unless otherwise noted. Figure 13. HD2 vs. VO (+5V)
-40 -45 -50
10MHz
Figure 14. HD3 vs. VO (+5V)
-40 -45 -50 -55 -60 -65 -70 -75 -80 -85 -90 -95
Distortion (dBc)
-55 -60 -65 -70 -75 -80 -85 -90 -95 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3 2.5
5MHz
Distortion (dBc)
10MHz
5MHz 100MHz 1MHz
1MHz 100KHz
0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3 2.5
Output Amplitude (Vpp)
Output Amplitude (Vpp)
Figure 15. CMRR vs. Frequency
-20 -30 -40 0 -10 -20
Figure 16. PSRR vs. Frequency
CMRR (dB)
PSRR (dB)
-50 -60 -70 -80 -90
-30 -40 -50 -60 -70 -80
-100 -120 10k
Vs = 5V
-90 1M 10M 100M 1G 10k 100k 1M 10M
Vs = 5V
100k
100M
1G
Frequency (Hz)
Frequency (Hz)
Figure 17. Open Loop Gain and Phase
80 70 60 50
Gain
Figure 18. Output Swing vs. Load (+3V)
3.25 3.0 2.75 2.50 2.25 2.0 1.75 1.50 1.25 1.0 0.75 0.50 0.25 0 -0.25
0 -20 -40 -60
Phase
Output Voltage (V)
RL = 150
Phase (deg)
Gain (dB)
40 30 20 10 0 -10 -20 10k
-80 -100 -120 -140 -160 -180 -200 1M 10M 100M 1G
RL = 75
Vs = 5V
G = -1
RL = 10K
100k
-2.0
-1.5
-1.0
-0.5
0
0.5
1.0
1.5
2.0
Frequency (Hz)
Input Voltage (V)
FHP3130, FHP3230, FHP3430 Rev. 1A
9
www.fairchildsemi.com
FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
Typical Performance Characteristics
Tc = 25C, Vs = 5V, RL = 2k to Vs/2 for Vs = 5V and 3V, RL = 2k to ground for Vs = 5V, G = 2, Rf = Rg = 1k; unless otherwise noted. Figure 19. Input Voltage Noise (+3V)
100
Figure 20. Crosstalk vs. Frequency (+3V)
-30 -35 -40 -45 -50 -55 -60 -65 -70 -75 -80 -85 -90 0.1 1 10 100
Input Voltage Noise (nV/Hz)
90 80 70 60 50 40 30 20 10 0 0.0001 0.001 0.01 0.1 1 10 100
Frequency (MHz)
Crosstalk (dB)
Frequency (MHz)
Figure 21. Pulse Resp. vs. Common Mode Voltage
Output Voltage (0.5V/div)
1.2V Offset 0.6V Offset
Figure 22. Large Signal Pulse Response (+3V)
2.5 2.0
-0.6V Offset -1.2V Offset
Voltage (V)
No Offset
1.5 1.0 0.5 0
G = -1
G=2
-0.5
Time (0.2s/div)
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Time (s)
Figure 23. Large Signal Pulse Response (+5V)
3.5 3.0 2.5
Figure 24. Large Signal Pulse Response (5V)
4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 -0.5 0
Voltage (V)
2.0 1.5 1.0 0.5 0
G=2
Voltage (V)
G=2
-0.5 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Time (s)
Time (s)
www.fairchildsemi.com
10
FHP3130, FHP3230, FHP3430 Rev. 1A
FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
Typical Performance Characteristics
Tc = 25C, Vs = 5V, RL = 2k to Vs/2 for Vs = 5V and 3V, RL = 2k to ground for Vs = 5V, G = 2, Rf = Rg = 1k; unless otherwise noted. Figure 25. Differential Gain and Phase (2.5V)
0.05 0.04
RL = 150 AC coupled into 220F Gain
Figure 26. Differential Gain and Phase (5V)
0.01 0.008
Vs = 5V RL = 150 AC coupled into 220F Gain
0.05 0.04 0.03 0.02
Phase
0.01 0.008
Differential Phase (deg)
Differential Phase (deg)
Differential Gain (%)
0.03 0.02 0.01 0 -0.01 -0.02 -0.03 -0.04 -0.6 -0.4 -0.2 0 0.2 0.4 0.6
Differential Gain (%)
0.006 0.004 0.002 0 -0.002 -0.004 -0.006 -0.008 -0.01 -0.7
0.006 0.004 0.002
Phase
0.01 0 -0.01 -0.02 -0.03 -0.04
0 -0.002 -0.004 -0.006 -0.008 -0.01
-0.5
-0.3
-0.1
0.1
0.3
0.5
0.7
Input Voltage (V)
Input Voltage (V)
FHP3130, FHP3230, FHP3430 Rev. 1A
11
www.fairchildsemi.com
FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
Applications Information
General Description
The FHP3130 (single), FHP3230 (dual), and FHP3430 (quad) are low cost, high performance, voltage feedback amplifiers that consume only 2.5mA of supply current per channel while providing 100mA of output current. These amplifiers are designed to operate from 2.7V to 12V (6V) supplies. The common mode voltage range extends below the negative rail and the output provides rail-to-rail performance. The FHP3130, FHP3230, and FHP3430 are designed on a complimentary bipolar process and provide 170MHz of bandwidth and 110V/s of slew rate at a supply voltage of 5V. The combination of low power, rail-to-rail performance, low voltage operation, and tiny package options make these amplifiers well suited for use in many general purpose high speed applications. These amplifiers also provide excellent video specifications. They offer extremely low differential gain and phase (0.008%/ 0.01) and 0.1dB gain flatness to 16MHz for superb standard definition video performance. Their output drive capability effortlessly supports 4 video loads.
Where Is is the supply current, Vs+ is the positive supply pin voltage, Vs- is the negative supply pin voltage, Vo(RMS) is the RMS output voltage and IOUT(RMS) is the RMS output current delivered to the load. Follow the maximum power derating curves shown in Figure 28 below to ensure proper operation.
Maximum Power Dissipation (W)
1.6 1.4 1.2 1.0
SOIC-8 TSSOP-14 SOIC-14
0.8 0.6 0.4 0.2 0 -40 -20 0 20 40 60 80
SOT23-5 MSOP-8
Ambient Temperature (C)
Driving Capacitive Loads
The Frequency Response vs. CL plot on page 8, illustrates the response of the FHP3230 Family. A small series resistance (Rs) at the output of the amplifier, illustrated in Figure 27, will improve stability and settling performance. Rs values in the Frequency Response vs. CL plot were chosen to achieve maximum bandwidth with less than 1dB of peaking. For maximum flatness, use a larger Rs.
Figure 28. Maximum Power Derating Overdrive Recovery
For an amplifier, an overdrive condition occurs when the output and/or input ranges are exceeded. The recovery time varies based on whether the input or output is overdriven and by how much the ranges are exceeded. The FHP3130/3230/3430 will typically recover in less than 50ns from an overdrive condition. Figure 29 shows the FHP3230 in an overdriven condition.
+ Rf Rg
Rs
3.5
CL
RL
Voltage (V)
3.0
Output
2.5 2.0 1.5 1.0 0.5 0 -0.5 0 0.2 0.4 0.6 0.8 10 1.2
Input
Vs = 3V G=5 RL = 2k Rf = 1k
Figure 27. Typical Topology for Driving Capactive Loads Power Dissipation
The maximum internal power dissipation allowed is directly related to the maximum junction temperature. If the maximum junction temperature exceeds 150C for an extended time, device failure may occur. The FHP3130, FHP3230 and FHP3430 are short circuit protected. However, this may not guarantee that the maximum junction temperature (+150C) is not exceeded under all conditions. RMS Power Dissipation can be calculated using the following equation: Power Dissipation = Is * (Vs+ - Vs-) + (Vs+ - Vo(RMS)) * IOUT(RMS)
1.4
1.6
1.8
Time (s)
Figure 29. Overdrive Recovery Composite Video Summer
The bandwidth and differential gain/phase performance of the FHP3130/3230/3430 amplifiers make them well suited for video applications. Figure 30 shows a typical Composite Video Summer. The high output current capability allows for driving multiple video loads. Figure 31 shows the resulting differential gain/ phase of this 3-amp configuration driving 4 video loads, 37.5.
www.fairchildsemi.com
12
FHP3130, FHP3230, FHP3430 Rev. 1A
FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
Evaluation Board Information
YIN 75 +
1/4 FHP3430
1k
-
The following evaluation boards are available to aid in the testing and layout of thes devices:
+ 1k
1/4 FHP3430
1k 1k
75
CYOUT 75
Evaluation Board #
KEB002 KEB003
Products
FHP3130IS5X FHP3130IM8X FHP3230IMU8X FHP3230IM8X FHP3430IMTC14X FHP3430IM14X
-
1k CIN 75 +
1/4 FHP3430
1k 500
-
1k 1k
KEB010 KEB006 KEB012
Figure 30. Typical Composite Video Summer
0.05 0.05
KEB018
Evalutaion Board Schematics
0 -0.05
Phase
Differential Gain (%)
Gain
0 -0.05 -0.1 -0.15 -0.2
Evaluation board schematics and layouts are shown in Figures 32 thru 46. These evaluation boards are built for dual supply operation. Follow these steps to use the board in a single supply application: 1. Short -Vs to ground 2. Use C3 and C4, if the -Vs pin of the amplifier is not directly connected to the ground plane.
Differential Phase (deg)
-0.1 -0.15 -0.2 -0.25
Vs = 5V RL = 37.5
-0.25 -0.3 -0.1 0.1 0.3 0.5 0.7
-0.7
-0.5
Input Voltage (V)
Figure 31. DG/DP of CV Summer Driving 4 Video Loads
Layout Considerations
General layout and supply bypassing play major roles in high frequency performance. Fairchild has evaluation boards to use as a guide for high frequency layout and as aid in device testing and characterization. Follow the steps below as a basis for high frequency layout: * Include 6.8F and 0.01F ceramic capacitors * Place the 6.8F capacitor within 0.75 inches of the power pin * Place the 0.01F capacitor within 0.1 inches of the power pin * Remove the ground plane under and around the part, especially near the input and output pins to reduce parasitic capacitance * Minimize all trace lengths to reduce series inductances Refer to the evaluation board layouts shown below for more information.
Figure 32. FHP3130 KEB002/KEB003 Schematic
FHP3130, FHP3230, FHP3430 Rev. 1A
13
www.fairchildsemi.com
FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
Figure 33. FHP3130 KEB002 (top side)
Figure 35. FHP3130 KEB003 (top side)
Figure 34. FHP3130 KEB002 (bottom side)
Figure 36. FHP3130 KEB003 (bottom side)
www.fairchildsemi.com
14
FHP3130, FHP3230, FHP3430 Rev. 1A
FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
Figure 37. FHP3230 KEB006/KEB010 Schematic
Figure 39. FHP3230 KEB006 (bottom side)
Figure 38. FHP3230 KEB006 (top side)
Figure 40. FHP3230 KEB010 (top side)
FHP3130, FHP3230, FHP3430 Rev. 1A
15
www.fairchildsemi.com
FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
Figure 41. FHP3230 KEB010 (bottom side) Figure 43. FHP3430 KEB012 (top side)
Figure 42. FHP3430 KEB012/KEB018 Schematic Figure 44. FHP3430 KEB012 (bottom side)
www.fairchildsemi.com
16
FHP3130, FHP3230, FHP3430 Rev. 1A
FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
Figure 45. FHP3430 KEB018 (top side)
Figure 46. FHP3430 KEB018 (bottom side)
FHP3130, FHP3230, FHP3430 Rev. 1A
17
www.fairchildsemi.com
FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
Mechanical Dimensions
8-Lead Outline Package (SOIC)
SOIC-8
D e ZD C L 7 SYMBOL A1 B C D E e H h L A ZD A2 L MIN MAX 0.10 0.25 0.36 0.46 0.19 0.25 4.80 4.98 3.81 3.99 1.27 BSC 5.80 6.20 0.25 0.50 0.41 1.27 1.52 1.72 8 0 0.53 ref 1.37 1.57
C L
E
H
Pin No. 1
B
DETAIL-A
h x 45
NOTE:
DETAIL-A 1. All dimensions are in millimeters. 2. Lead coplanarity should be 0 to 0.10mm (.004") max. 3. Package surface finishing: (2.1) Top: matte (charmilles #18~30). (2.2) All sides: matte (charmilles #18~30). (2.3) Bottom: smooth or matte (charmilles #18~30). 4. All dimensions excluding mold flashes and end flash from the package body shall not exceed 0.152mm (.006) per side (D).
A
A1
A2
C
8-Lead Outline Package (MSOP)
e S 02
MSOP-8
t1 R1 SYMBOL MIN A 1.10 A1 0.10 A2 0.86 D 3.00 D2 2.95 E 4.90 E1 3.00 E2 2.95 E3 0.51 E4 0.51 R 0.15 R1 0.15 t1 0.31 t2 0.41 b 0.33 b1 0.30 c 0.18 c1 0.15 01 3.0 02 12.0 03 12.0 L 0.55 L1 0.95 BSC aaa 0.10 bbb 0.08 ccc 0.25 e 0.65 BSC S 0.525 BSC MAX - 0.05 0.08 0.10 0.10 0.15 0.10 0.10 0.13 0.13 +0.15/-0.06 +0.15/-0.06 0.08 0.08 +0.07/-0.08 0.05 0.05 +0.03/-0.02 3.0 3.0 3.0 0.15 - - - - - -
E/2 2X
-H-
t2 R Gauge Plane
E1
3
7
0.25mm
-B-
2
03 b L1 c1 b1 Section A - A
5
L
01
E3 E4 1 2
2 4 6
ccc A B C c D2 A2
-C-
Detail A Scale 40:1 Detail A
E2
A b
aaa A bbb M A B C
-A-
A A E1 E
A1
D
3 4
NOTE:
1 All dimensions are in millimeters (angle in degrees), unless otherwise specified.
2 3 4 5 6 7
Datums - B - and - C - to be determined at datum plane - H - . Dimensions "D" and "E1" are to be determined at datum - H - . Dimensions "D2" and "E2" are for top package and dimensions "D" and "E1" are for bottom package. Cross sections A - A to be determined at 0.13 to 0.25mm from the leadtip. Dimension "D" and "D2" does not include mold flash, protrusion or gate burrs. Dimension "E1" and "E2" does not include interlead flash or protrusion.
www.fairchildsemi.com
18
FHP3130, FHP3230, FHP3430 Rev. 1A
FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
Mechanical Dimensions
14-Lead Outline Package (SOIC)
SOIC-14
D e ZD C L 7 SYMBOL A1 B C D E e H h L A ZD A2 L MIN MAX .0040 .0098 .014 .018 .0075 .0098 .337 .344 .150 .157 .050 BSC .2284 .2440 .0099 .0196 .016 .050 .060 .068 8 0 0.20 ref .054 .062
C L
E
H
Pin No. 1
B
DETAIL-A
h x 45
NOTE:
DETAIL-A 1. All dimensions are in inches. 2. Lead coplanarity should be 0 to 0.10mm (.004") m 3. Package surface finishing: (2.1) Top: matte (charmilles #18~30). (2.2) All sides: matte (charmilles #18~30). (2.3) Bottom: smooth or matte (charmilles #18~30 4. All dimensions excluding mold flashes and end fla from the package body shall not exceed o.152mm per side (d).
A
A1
A2
C
14-Lead Outline Package (TSSOP)
6 N 5
e
-B-
7
2X E/2 1.0 DIA 1.0
(b)
8
TSSOP-14
c1 SYMBOL A A1 A2 L R R1 b b1 c c1 01 L1 aaa bbb ccc ddd e 02 03 D E1 E e N MIN - 0.05 0.85 0.50 0.09 0.09 0.19 0.19 0.09 0.09 0 NOM - - 0.90 0.60 - - - 0.22 - - - 1.0 REF 0.10 0.10 0.05 0.20 0.65 BSC 12 REF 12 REF 5.00 4.40 6.4 BSC 0.65 BSC 14 MAX 1.10 0.15 0.95 0.75 - - 0.30 0.25 0.20 0.16 8
E1 E
c
b1 ddd C B A
2X N/2 TIPS 123 6
1.0
e /2 9
SECTION AA
ccc
7
-A-
D8 3
A2 A
aaa C
-C-
b NX bbb M C B A
A1
(02) (0.20) R1
-H-
R
GAGE PLANE 10
4.90 4.30
5.10 4.50
A A
0.25
(03)
L (L1)
01
NOTES:
1 All dimensions are in millimeters (angle in degrees).
2 3 4 5
Dimensioning and tolerancing per ASME Y14.5-1994. Dimensions "D" does not include mold flash, protusions or gate burrs. Mold flash protusions or gate burrs shall not exceed 0.15 per side . Dimension "E1" does not include interlead flash or protusion. Interlead flash or protusion shall not exceed 0.25 per side. Dimension "b" does not include dambar protusion. Allowable dambar protusion shall be 0.08mm total in excess of the "b" dimension at maximum material condition. Dambar connot be located on the lower radius of the foot. Minimum space between protusion and adjacent lead is 0.07mm for 0.5mm pitch packages.
FHP3130, FHP3230, FHP3430 Rev. 1A
19
www.fairchildsemi.com
FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
Mechanical Dimensions
5-Lead Outline Package (SOT23)
DATUM 'A'
b
C L
e
2 SYMBOL A A1 A2 b C D E E1 L e e1 MIN 0.90 0.00 0.90 0.25 0.09 2.80 2.60 1.50 0.35 MAX 1.45 0.15 1.30 0.50 0.20 3.10 3.00 1.75 0.55 0.95 ref 1.90 ref 0 10
C L
E
C L
E1
e1 D C L
C
NOTE:
1. All dimensions are in millimeters. 2 Foot length measured reference to flat foot surface parallel to DATUM 'A' and lead surface. 3. Package outline exclusive of mold flash & metal burr. 4. Package outline inclusive of solder plating. 5. Comply to EIAJ SC74A. 6. Package ST 0003 REV A supercedes SOT-D-2005 REV C.
A
A2
A1
www.fairchildsemi.com
20
FHP3130, FHP3230, FHP3430 Rev. 1A
FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
Ordering Information
Model Part Number Lead Free Yes Yes Yes Yes Yes Yes Package SOT23-5 SOIC-8 MSOP-8 SOIC-8 TSSOP-14 SOIC-14 Container Reel Reel Reel Reel Reel Reel Pack Qty 3000 2500 3000 2500 2500 2500
FHP3130 FHP3130IS5X* FHP3130 FHP3130IM8X* FHP3230 FHP3230IMU8X* FHP3230 FHP3230IM8X FHP3430 FHP3430IMTC14X* FHP3430 FHP3430IM14X*
Temperature range for all parts: -40C to +85C. Moisture sensitivity level for all parts is MSL-1. * Preliminary
FHP3130, FHP3230, FHP3430 Rev. 1A
21
www.fairchildsemi.com
FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High Speed, 2.7V to 12V, Rail-to-Rail Amplifiers
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACExTM FAST ActiveArrayTM FASTrTM BottomlessTM FPSTM Build it NowTM FRFETTM CoolFETTM GlobalOptoisolatorTM CROSSVOLTTM GTOTM DOMETM HiSeCTM EcoSPARKTM I2CTM E2CMOSTM i-LoTM EnSignaTM ImpliedDisconnectTM FACTTM IntelliMAXTM FACT Quiet SeriesTM Across the board. Around the world.TM The Power Franchise Programmable Active DroopTM
DISCLAIMER
ISOPLANARTM LittleFETTM MICROCOUPLERTM MicroFETTM MicroPakTM MICROWIRETM MSXTM MSXProTM OCXTM OCXProTM OPTOLOGIC OPTOPLANARTM PACMANTM POPTM Power247TM PowerEdgeTM
PowerSaverTM PowerTrench QFET QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM SerDesTM SILENT SWITCHER SMART STARTTM SPMTM StealthTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6
SuperSOTTM-8 SyncFETTM TinyLogic TINYOPTOTM TruTranslationTM UHCTM UltraFET UniFETTM VCXTM WireTM
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. I16
www.fairchildsemi.com
22
(c)2005 Fairchild Semiconductor Corporation

▲Up To Search▲

Price & Availability of FHP3230

	To Download FHP3230 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .